For those classic car owners who live in more dramatic climates, it’s time to put their cars to bed for the winter. We’ve put together some steps to help your customers do it right. Feel free to pass this information on to anyone who may benefit.

1. Top off your levels.

Fill your gas tank and add a fuel preservative. The full tank keeps out moisture, and the preservative keeps the gas from breaking down. Take one last drive to circulate the preservative.

Make sure your antifreeze is fresh and topped off.
To avoid a nasty sludge in the spring, change the oil
2. Take preventative measures.

Give your car a good wash and wax to protect the paint. Protect the chrome with wax or paint sealant.
Over-inflate tires to avoid flat spotting, or jack up the car to take pressure off the tires.
Put a battery manager on your car.
To prevent rodents nesting in an engine compartment, try a rodent repellent under the hood. Just remember to remove it before starting up.
Put down a few moisture pads on the upholstery to absorb moisture and prevent mildew.
Cover the car with a breathable car cover to prevent corrosion and rust.

3. Re-circulate your oil.

When a car sits, oil settles into the pan, leaving the engine without lubrication. Disconnect the coil wire and crank the engine over several times. Reconnect the coil wire and you should be good to go.

This entry was posted on October 27, 2011 at 10:10 am. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Posted in Useful Tips by Bill Allen No Comments Yet